manualshive.com logo in svg

Mitel 6873i, User Manual

The Mitel 6873i is a cutting-edge IP phone that combines advanced features with user-friendly design. Enhance your communication experience with this sleek device by accessing its Quick Reference Manual, available for free download at manualshive.com. Explore its full potential, hassle-free, with our comprehensive user manual.

Share
Download
background image

Customizing Your Phone

77

AUDIO

The

 Audio

 option on the IP phone allows you to set the audio mode for your IP phone, configure 

headset settings, and personalize ring tones and tone sets.

AUDIO MODE

The 6873i allows you to use a handset, a USB or Bluetooth headset, or handsfree mode to 
handle incoming and outgoing calls. The 

Audio Mode

 option provides different combinations 

of these three methods to provide maximum flexibility in handling calls. There are four audio 
mode options you can set:

AUDIO MODE 
OPTION

DESCRIPTION

Speaker

This is the default setting. Calls can be made or received using the handset or 
handsfree speakerphone. In handset audio mode, pressing the 

 button 

on the phone switches to handsfree speakerphone. In Speaker audio mode, lift 
the handset to switch to the handset.

Headset 

Choose this setting if you want to make or receive all calls using a handset or 
headset. Calls can be switched from the handset to headset by pressing 
the

button on the phone. To switch from the headset to the handset, lift 

the handset.

Speaker/Headset

Incoming calls are sent to the handsfree speakerphone first when the 

 

button is pressed. By pressing the button again, you can switch back and forth 
between the handsfree speakerphone and the headset. At anytime, lifting the 
handset switches back to the handset from either the handsfree speakerphone 
or the headset.

Headset/Speaker

Incoming calls are sent to the headset first when the 

 button is pressed. 

By pressing the button again, you can switch back and forth between the 
headset and the handsfree speakerphone. At anytime, lifting the handset 
switches back to the handset from either the headset or the handsfree 
speakerphone.

Notes: 

1.

When the default (Speaker) audio mode is being used, if a USB headset is 

connected, or when Bluetooth is enabled and a Bluetooth headset is paired, the 
phone automatically switches the audio mode to Headset/Speaker. You can 
manually change the audio mode to any of the other audio modes, but if you change 
it to Speaker, upon reboot, the phone will detect the headset and revert back to the 
last known Headset-related audio mode.

2.

If a headset is not connected, you can manually change the audio mode from 

Speaker to any of the other audio modes, but upon reboot, the phone will detect 
that there is no headset and revert back to Speaker audio mode.

Summary of Contents for 6873i




































































































































































































































































Reviews:

No comments

Related manuals for 6873i

Yealink T5 Series User Manual preview
T5 Series
Brand: Yealink Pages: 229
Olympia SUN Quick Reference Manual preview
SUN
Brand: Olympia Pages: 88
Sony Ericsson T102 User Manual preview
T102
Brand: Sony Ericsson Pages: 74
Grandstream Networks GRP2612/G Quick Installation Manual preview
GRP2612/G
Brand: Grandstream Networks Pages: 25
Jacob Jensen Telephone 10 Manual preview
Telephone 10
Brand: Jacob Jensen Pages: 76
Alcatel 1L Pro User Manual preview
1L Pro
Brand: Alcatel Pages: 56
Planet VIP-1120PT Quick Installation Manual preview
VIP-1120PT
Brand: Planet Pages: 8
Sony Ericsson Xperia Play R800A White Paper preview
Xperia Play R800A
Brand: Sony Ericsson Pages: 19
Pepperl+Fuchs Ecom Smart-Ex 02 Manual preview
Ecom Smart-Ex 02
Brand: Pepperl+Fuchs Pages: 60
Gigo SPARX User Manual preview
SPARX
Brand: Gigo Pages: 22
GENERAL MOBILE DST800 User Manual preview
DST800
Brand: GENERAL MOBILE Pages: 55
myPhone POCKET PRO User Manual preview
POCKET PRO
Brand: myPhone Pages: 41
Nokia 3390 User Manual preview
3390
Brand: Nokia Pages: 161
LG 100C Manual preview
100C
Brand: LG Pages: 24
LG 1010 Online User'S Manual preview
1010
Brand: LG Pages: 46
LG 1000 Migo User Manual preview
1000 Migo
Brand: LG Pages: 36
LG 002KPYR0001018 User Manual preview
002KPYR0001018
Brand: LG Pages: 98
LG -P509 User Manual preview
-P509
Brand: LG Pages: 396

Brands by name

Popular brands

Load more brands