Mitel 6873i User Manual Download

Page: 24 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

MULTI-VIEW CALL SCREEN

The

Multi-View Call

screen allows you to manage your calls more efficiently when you have

more than one call in progress. It is particularly useful in transfer and conference scenarios. All
pertinent information from the

Detailed-View Call

screen is also available on the

Multi-View

Call

screen but information for two remote parties can be seen simultaneously.

The following table identifies and describes the call status and call feature indicators on the

Multi-View Call

screen.

INDICATOR/ICON DESCRIPTION

Call Status Indicators

N/A

No icon denotes that the call is connected and in progress.

Indicates the call is on hold.

Indicates the call is an incoming call.

Indicates the call is an outgoing call.

Indicates the party is a conference call participant. The direction of the arrow (if
applicable) denotes where the other conference call participant is in the list of
calls.

Call Feature Indicators

Indicates the call is secured using TLS/SRTP encryption.

Indicates the call is using Mitel Hi-Q™ audio.

Indicates active VoIP recording is enabled and the call is being recorded.

Call Timer

Call Status
Indicators

Call Feature

Indicators

Caller ID

Picture ID

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands