Mitel 6873i User Manual Download

Page: 158 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

156

Press an entry and then press the right arrow button or

Details

softkey to see more detailed

information about the redial entry.

To dial the displayed number while in the Outgoing Redial List, press

, press the

Dial

softkey, lift the handset, or press any of the line keys.

To exit the Outgoing Redial List, press

or the

Quit

softkey.

EDITING ENTRIES IN THE OUTGOING REDIAL LIST

In the Outgoing Redial List, pressing the

Edit

softkey allows you to edit the entry’s name and/or

number prior to dialing out or copying to the Local Directory.

Press the

key.

Swipe up and down to scroll through the entries in the Outgoing Redial List.

Press an entry and press the right arrow button or

Details

softkey to see more detailed

information about the Outgoing Redial List entry.

Note:

The detailed view screen contains the picture ID of the called party (if available),

the date and time of the outgoing call, the line on which the call was placed, call duration
(if the call was answered), any applicable call feature indicators, and the caller ID details.

IP PHONE UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands