Matrix NAVAN CNX200, System Manual

Page: 67 / 1388

Matrix NAVAN CNX200 System Manual 57
PPPoE Password
• This is the password provided by your Internet Service Provider for the PPPoE User ID. If you have
selected PPPoE as Connection Type, you must enter the password provided by your Internet Service
provider here.
PPPoE Service Name
• If your Internet Service Provider has provided a Service Name, enter the Service Name here. If your
Internet Service Provider has not provided a Service Name, do not configure this parameter.
Server Address
• NAVAN works as the Auto Configuration Server for the phone. Enter the LAN IP Address or WAN IP
Address/Domain Name of NAVAN here. Default: blank.
The phone sends the request for configuration files to this Server Address.
If you have selected DHCP as Connection Type, the phone will get the Server Address automatically from
the DHCP Server. For this, use
DHCP Option 224 and Data Type as ‘ String ’ to provide Server Address
from the DHCP Server.
When you configure the DHCP Server of NAVAN for assigning the IP Address to the Extended IP Phone,
NAVAN uses the DHCP Option 224 and Data Type as “String” to provide Server Address:SPARSH Port
to the Extended IP Phone(s). Server Address is the IP Address of LAN port of NAVAN. NAVAN handles
this DHCP Option 224 internally without you worrying for related parameters’ configuration.
While registering the Extended IP Phone with NAVAN, if you use any 3rd party DHCP server in your LAN
(other than NAVAN) for assigning IP Address to the Extended IP Phone, then select
DHCP Option 224 ,
Data Type as “String” and program the Server Address and SPARSH Port in the given format
“IP_Address:Port” in the 3rd party DHCP server. Server Address can be either LAN or WAN IP Address/
Domain Name of NAVAN depending on the network installation scenario.
For PPPoE and Static Connection Types, you need to enter the Server Address manually.
Server Port
• Enter the SPARSH Port of NAVAN here.
The phone sends the request for configuration files to this port.
Valid range of the port is: 80 or 1025–65535. Default: 80.
VLAN Setting
If your phone is connected to a virtual LAN, you need to configure VLAN Settings.
To enable the VLAN switch to correctly route packets generated by the phone and the computers (on the LAN) to
each other, the packets must be tagged with a VLAN header.
The VLAN header consists of the VLAN ID (12-bit) and Class of Service (CoS, 3-bit) for prioritization of traffic
11
.
11. The IEEE 802.1P standard allows Layer2 switches to prioritize the traffic, thus providing Quality of Service (QoS), that is, better han-
dling of data that pass over a network, thereby resulting in greater reliability and quality. Quality of Service (QoS) on Layer2 is referred
to as Class of Service (CoS) which is defined by IEEE 802.1P.