Matrix NAVAN CNX200 System Manual Download | Manualshive

Page: 842 / 1388

background image

832

Matrix NAVAN CNX200 System Manual

Here,

•

The sender of the SMS is John (9898214345).

•

The sender must send the message to the SIM Number of the Mobile Port of NAVAN, that is 9898012345.

•

The body of the message must contain the following:
•

To:

This is the destination where the IM is to be sent. In this case 2001.

•

Sub:

This is the message that will be displayed to the recipients. In this case, ‘Meeting at 10.00 a.m.

tomorrow’.

•

When the SMS is received on Mobile Port (9898012345) in the above format, the system checks the
senders number (9898214345 - John) in the Denied numbers list of the SMS Server.

If the SMS is received in multiple parts, the first 160 characters only will be sent as an IM.

•

If a match is found in the Denied list, the SMS will be rejected. If no match is found, then it checks the
destination where the SMS is to be forwarded as an IM.

The destination can be the recipients Extension number or Name. The

To

field in the message body

specifies the destination.

You cannot send the same message to multiple destinations at the same time. You will have to send the
same message to individual recipients one at a time.

•

When the destination is an Email ID, the further handling of the SMS will be done by the SMS Server
Application. See

“SMS Server”

for more details.

•

When the destination is an Extension Number, the system will search for the Extension Number in its
database. When a match is found and it is a SIP extension, the system will check if the option

SMS

over IP

is enabled for this SIP extension. If it is enabled, then the SMS will be forwarded as an IM. If

this option is disabled, then further handling of the SMS will be done by the SMS Server Application.
See

“SMS Server”

for more details.

When the destination is an Extension Number other than SIP extension, the further handling of the
SMS will be done by the SMS Server Application. See

“SMS Server”

for more details.

•

When the destination is a Name, the system will search for the Name in its database. When a match is
found, the system will check the corresponding Extension number. If it is a SIP extension the SMS will
be forwarded as an IM. If the Extension Number is any other extension or if a match is not found, then
further handling of the SMS will be done by the SMS Server Application. See

“SMS Server”

details.

Forwarding an IM as an SMS

You can send a message either as an IM or an SMS using Matrix SPARSH Mobile Soft-phone Clients only.

«
...
840
841
842
843
844
...
»

Summary of Contents for NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NAVAN CNX200

Brand: D-Link Pages: 166

Brand: Vaisala Pages: 54

AURVANA TRIO WIRELESS

Brand: Creative Pages: 39

Brand: Enterasys Pages: 36

Spectrum24 AP-41X1-1050 HR

Brand: Symbol Pages: 2

Brand: Baileigh Pages: 20

Brand: Gigawave Pages: 4

Brand: SHYAM Networks Pages: 8

Brand: F.F. Group Pages: 56

Brand: EnGenius Pages: 86

Brand: ITTIM Technology Pages: 6

Brand: Ebyte Pages: 14

Brand: Ebyte Pages: 27

Brand: Vivitar Pages: 2

Brand: VideoComm Technologies Pages: 10

Brand: Ubiquiti Pages: 24

Brand: Geemarc Pages: 25

Brand: Intellinet Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands