Matrix NAVAN CNX200, System Manual

Page: 1268 / 1388

1258 Matrix NAVAN CNX200 System Manual
• Enter the User Name . The User Name can be of maximum 40 characters. User Name will be used for
authentication and privacy in SNMPV3.
• Select the appropriate Security Type as per your requirement. Security Type defines the level of
security.
• When Authentication and Privacy are not required, select No Authentication-No Privacy .
• When only Authentication is required, select Authentication without Privacy . Incoming SNMP
Messages will require authentication.
If you select this method, select the Authentication Algorithm as MD5 or SHA . Default: MD5.
In the Authentication Password , enter a password of your choice as Authentication Password for
the User Name you have assigned.The Authentication Password must be a minimum of 8
characters and may have up to 24 characters. Default: Blank.
• When both Authentication and Privacy are required, select Authentication with Privacy . Incoming
SNMP Message will require authentication and these messages will be encrypted, which will be
decrypted at the receivers end only.
If you select this method,
• Select the Authentication Type as MD5 or SHA . Default: MD5.
• Enter Authentication Password for the User Name you have assigned. The Authentication
Password must be a minimum of 8 characters and may have up to 24 characters. Default:
Blank.
• Select the Privacy Algorithm as DES or AES . Default: DES.
• Enter the Privacy Password of your choice.The Privacy Password must be a minimum of 8
characters and may have up to 24 characters. Default: Blank.