Matrix NAVAN CNX200 System Manual Download

Page: 586 / 1388

576

Matrix NAVAN CNX200 System Manual

•

On the left navigation bar, click the

Global Directory

link.

The table for the entries 100 to 199 appears on this page. Against each Index number,

•

Enter the contact’s

Number

you wish to store. The number may consist of 16 digits (maximum).

•

Enter the contact’s

Name

against the Number. The Name may contain up to 12 alphanumeric characters.

All ASCII characters except < > and “ (double quote) are allowed.

•

Click

Advance

to configure the

Email ID

and select the

Group

for the contact.

•

Enter the

Email ID

of the contact you wish to store. The Email ID can be a maximum of 64 characters.

•

You can assign the contact to a Group. Select the desired

Group

Type from the list. The system clubs

together contacts assigned to the same Group. Default: None. For details, see

“SMS/Email Group”

•

To configure more numbers, click the next tabs 200-299, 300-399, 400-499, 500-599, and so on. Follow
the same steps as described above.

•

Select the trunks to be used for routing the numbers of the Global Directory dialed out by extensions.

Double click the

Route Global Directory’s Numbers using trunks

field. A multiple selection box appears

as shown below.

Summary of Contents for NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NAVAN CNX200

Reviews:

Related manuals for NAVAN CNX200

Brands by name

Popular brands

Matrix NAVAN CNX200, System Manual

Search results

Summary of Contents for NAVAN CNX200

Reviews:

Related manuals for NAVAN CNX200

Brands by name

Popular brands