Matrix NAVAN CNX200, System Manual

Page: 825 / 1388

Matrix NAVAN CNX200 System Manual 815
• Configure the following parameters:
• Rotation: By default, all the messages will be sent using the first Mobile Port enabled by you.
Select the Rotation check box if you have multiple Mobile ports in your system variant and you
want the first SMS to be sent through the first Mobile Port, the second SMS through the second
Mobile Port and so on depending on the number of available mobile ports in your system.
If the Rotation check box is cleared, all the SMSes will be sent using the first Mobile Port enabled by
you. For example, if you have enabled MOB Port 1 and there is a request to send 5 SMSes, then all
the SMSes will be sent through MOB Port 1 only.
• Port No.: This is the Mobile Port number.
• Port Name: This is the name assigned to the Mobile Port. This will be displayed only if you have
assigned a name to the Mobile Port on the “Trunks” page.
• Enable Port: Select the Enable Port check box corresponding to the Mobile Port you want to use
for sending SMSes.
• Click Submit .
Make sure that you have selected the Allow sending SMS through this Port check box for this Mobile
Port in “Mobile Trunks” page.
Fixed Port Routing (SMS over IP)
You can route the SMS from SIP clients through a fixed mobile port. To do this, you must determine the port through
which the SMSes are to be sent and configure the SMS over IP-Fixed Port table accordingly.
Configuring Fixed Port Routing
1.
Log in as System Engineer.
2.
Click the PBX Settings tab.
3.
On the left navigation bar, click VoIP Configuration to expand and then click VoIP Port .
4.
Click SMS over IP Settings to expand.