Matrix NAVAN CNX200, System Manual

Page: 630 / 1388

620 Matrix NAVAN CNX200 System Manual
• On the left navigation bar, click the Automatic Number Translation link.
The Automatic Number Table 1 appears on this page. In the table,
• In the Dialed Number String column of the table you chose, configure the numbers you expect the
extension users to dial. The Dialed Numbers can be a maximum of 16 characters. Default: Blank.
When you want to specify number-length without specifying the numeric digits, use the character ‘$’ to
represent the digit. ‘$’ represents any number from 0 to 9.
• In the Strip Digits column, enter the number of digits you want the system to strip off from the Dialed
Number before the dialing out this number. The valid range is from 00 to 16. Default: 0.
• In the Add Prefix column, enter the number you want the system to add as prefix to the Dialed Number
before the system dials out this number. The Prefix can be a maximum of 40 characters. Default: Blank.
• Click Submit to save your entries.
• To enable Automatic Number Translation on a trunk, click the Trunks tab.
• On the left navigation bar, click the link of the desired trunk type: CO, Mobile or SIP.
• Select the trunk port number by clicking the corresponding tab located on the upper part of the trunk page.
For example, tap CO-1.
• On the trunk page, click the Automatic Number Translation (ANT) option to expand.