manualshive.com logo in svg

Matrix NAVAN CNX200, System Manual

The Matrix NAVAN CNX200 System Manual is available for free download from our website. This comprehensive manual provides detailed instructions to ensure a seamless setup and operation of your CNX200 device. Get expert guidance and maximize the potential of your product by downloading the manual from manualshive.com.

Share
Download
background image

Matrix NAVAN CNX200 System Manual

735

-------------------------------------------------------------------------------
 SrN  CALLING STATION  CALLED STATION      DATE       TIME       DUR             
-------------------------------------------------------------------------------
   1       204              301         12-01-2012  15:49:05     47            
   2       302              301         12-01-2012  16:51:28      3            
   3       301              201         12-01-2012  16:52:11     63            
   4       302              301         12-01-2012  17:00:23     29            
   5       302              301         12-01-2012  17:01:19     24            
   6       201              301         12-01-2012  17:01:19      2            
   7       302              3931        12-01-2012  18:11:03      2            
   8       303              3931        12-01-2012  18:25:53      3            
   9       303              3931        12-01-2012  18:26:03     20            
  10       3931             201         12-01-2012  18:26:20      2            
  11       302              301         12-01-2012  18:38:48     56            
  12       302              201         12-01-2012  18:38:40     66            
  13       302              201         12-01-2012  18:40:06    112            
  14       302              301         12-01-2012  18:40:01    121            
  15       302              201         12-01-2012  18:42:13     48            
  16       302              301         12-01-2012  18:42:08     52            
  17       302              301         12-01-2012  18:43:06     58            
  18       301              302         12-01-2012  18:44:08     13            
  19       301              302         12-01-2012  18:44:24     36            
  20       301              201         12-01-2012  18:44:28     36            
  21       3931             302         13-01-2012  10:46:04      1            
  22       203              302         13-01-2012  10:59:38      5            
  23       203              302         13-01-2012  11:17:08     18            
  24       203              302         13-01-2012  11:18:16      2            
  25       302              203         13-01-2012  11:21:05      4            
  26       302              301         13-01-2012  11:27:38     20            
  27       201              303         13-01-2012  11:29:31     29            
  28       201              303         13-01-2012  11:30:26     17            
  29       201              301         13-01-2012  11:30:34      9            
  30       3931             303         13-01-2012  11:48:23      1            
  31       3931             302         13-01-2012  11:52:04      2            
  33       302              3931        13-01-2012  11:54:31     13            
  34       3931             303         13-01-2012  11:54:41      1            
  35       302              303         13-01-2012  11:54:43     15                     
-------------------------------------------------------------------------------
 NAVAN V1R8                                              Page : 1 

The offline report for 

Outgoing Calls

 would look like this:

   

    SMDR OUTGOING CALLS REPORT          AS ON 02-02-2012(Thu) AT 09:14      

-------------------------------------------------------------------------------
                                    Originated on      Terminated on           
 STN  : 000000  To 999999         CO   : 001 To 006 CO   : 001 To 006          
 DATE : 01-05-2012 To 31-01-2012  MOB  : 001 To 002 MOB  : 001 To 002          
 TIME : 00:00 To 23:59            SIP  : 001 To 004 SIP  : 001 To 004          
 DEPT GROUP : 00 To 00                                                         
 DUR(sec)   : 000                                                              
 UNITS      : 0000                                                             
 ACCOUNT No : 000 To 000                                                                                                

-------------------------------------------------------------------------------
 SrN   STN    TRK CalledNo          DATE       TIME      DUR   UNIT AMOUNT  R  
-------------------------------------------------------------------------------
   1   3012 26001 3001              12-01-2012 11:45:04    8    1    1.10   I  
   2   3012 26001 3005              14-01-2012 09:39:13    9    1    1.10   I  

Summary of Contents for NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NAVAN CNX200

Arris SURFboard SBR-AC1200P User Manual preview
SURFboard SBR-AC1200P
Brand: Arris Pages: 58
Muse M-268 BT User Manual preview
M-268 BT
Brand: Muse Pages: 4
Salto RF Node Installation Manual preview
RF Node
Brand: Salto Pages: 3
Zonet ZSR0104UP User Manual preview
ZSR0104UP
Brand: Zonet Pages: 51
SoftBank 304HW User Manual preview
304HW
Brand: SoftBank Pages: 231
Acer BT-800 User Manual preview
BT-800
Brand: Acer Pages: 63
Acer 11b User Manual preview
11b
Brand: Acer Pages: 38
Acer Predator Connect X5 5G CPE User Manual preview
Predator Connect X5 5G CPE
Brand: Acer Pages: 56
Acer WarpLink 2412 Installation Manual preview
WarpLink 2412
Brand: Acer Pages: 39
Acer 11b Quick Installation Manual preview
11b
Brand: Acer Pages: 7
NLT AS14006 Manual preview
AS14006
Brand: NLT Pages: 22
Fluidmesh Videomesh 2200 Series User Manual preview
Videomesh 2200 Series
Brand: Fluidmesh Pages: 30
Dynalink DYWRT54 Quick Setup Manual preview
DYWRT54
Brand: Dynalink Pages: 2
Jaton AM4200T User Manual preview
AM4200T
Brand: Jaton Pages: 8
Datto AP440 User Manual preview
AP440
Brand: Datto Pages: 37
DAMSON ANC V2 Quick User Manual preview
ANC V2
Brand: DAMSON Pages: 2
GL Technologies GL-XE300C4 Let'S Get Started preview
GL-XE300C4
Brand: GL Technologies Pages: 2
NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router Installation Manual preview
DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router
Brand: NETGEAR Pages: 2

Brands by name

Popular brands

Load more brands