Matrix NAVAN CNX200, System Manual

Page: 615 / 1388

Matrix NAVAN CNX200 System Manual 605
10.
Repeat the same steps to select Operator Extension/s for Break and Night time.
11.
Click Submit .
For each extension you have selected as Operator for the Day, Break and Night,
• define the Class of Service
99
• set Toll Control
100
• select Outgoing Trunks
101
• set Priority
102
for the Operator extension
You can set Class of Service, Toll Control, Outgoing Trunks and Priority for the Operator extension when
you configure the parameters of different extension types: SLT and SIP Extensions from their respective
pages.
99. These are features allowed/denied to the Operator extension.
100. The type of calls to be allowed/denied to the Operator extension during the day, break and night: local calls, regional calls, national
calls, international calls, limited calls.
101. The trunks through which outgoing calls are to be routed during the day, break and night.
102. Each extension of the NAVAN is assigned a Priority Level starting from 1, 2, 3, 4...to 9. With 1 being the lowest priority and 9 being
the highest priority. The calls from an extension with higher priority has preference in call landing. When an extension with higher
priority calls another with lower priority, a triple ring is placed on the called extension, and the call will land first on the extension
when there are multiple incoming calls on the extension with lower priority.