Matrix NAVAN CNX200, System Manual

Page: 1186 / 1388

1176 Matrix NAVAN CNX200 System Manual
• Dial 1 to select the station user for which the Reminder is to be set. VMS responds with: “Enter the Date in
DD MM YYYY format. To Cancel all Reminders, Press '# (pound/hash)'. For example, To enter Date 17th
March 2008, Dial One Seven Zero Three Two Zero Zero Eight.” (AlarmDateI.wav)
• If no date is entered, the VMS prompts: “You have not entered any input” (NoInput.wav)
• If invalid date is entered then VMS prompts: “You have entered invalid input.” (InvalidInput.wav)
• Dial valid date

VMS prompts: “Enter the time, HH MM in twenty-four hour format.” (Entertime2I.wav)
• If no time is entered then VMS prompts: “You have not entered any input” (NoInput.wav)
• If invalid time is entered then VMS prompts: “You have entered invalid input.” (InvalidInput.wav)
• Dial valid time

VMS prompts: “To set it as Personal, Press 1. To set it as Automated, Press 2."
(Alarmmode.wav)
• Dial 1  VMS responds with: “You have set Personal Reminder for….” (PerReminderVeri.wav)
followed by the prompt: “To Confirm
164
, Press 1, To Re-enter, Press 2." (AlarmConf.wav)
• Dial 1

VMS responds with: “Your Personal Reminder is set.” (PerReminderSet.wav) followed by the
prompt: Thanks for using this Service.” (Thankservice.wav)
• If Reminder is not set, the VMS responds with: “Sorry! Your Reminder cannot be set. Please call
Operator for further assistance.” (ReminderNoset.wav) VMS further responds with: “Thanks for using
this Service.” (Thankservice.wav)
OR
• Dial 2  VMS responds with: “You have set Automated Reminder for….” (AutoReminderVeri.wav)
followed by the prompt: “To Confirm, Press 1, To Re-enter, Press 2." (AlarmConf.wav)
• Dial 1  VMS responds with: “Your Automated Reminder is set.” (PerReminderSet.wav) followed by
the prompt: “Thanks for using this Service.” (Thankservice.wav)
• If Reminder is not set, VMS responds with: “Sorry! Your Reminder cannot be set. Please call Operator
for further assistance.” (AlarmNoset.wav) VMS further responds with: “Thanks for using this Service."
(Thankservice.wav)
• Dial # to cancel Reminder

VMS responds with: "Your Reminder is cancelled.” (ReminderCancel.wav)
followed by the prompt: “Thanks for using this Service.” (Thankservice.wav)
• If no reminder is set, VMS responds with: “Sorry! There is no Reminder to cancel.”
(Remindernocancel.wav) followed by the prompt: “Thanks for using this Service.” (Thankservice.wav)
164.This option will not be played, if Alarm Verification is disabled in the System parameters.