Matrix NAVAN CNX200, System Manual

Page: 83 / 1388

Matrix NAVAN CNX200 System Manual 73
• Status of Features: The LED of a DSS key is activated when the feature assigned to this key is used.
The LED of DSS keys assigned to Extensions/Trunks glow in a single color - Red - to indicate status of
the call event on the Extensions/Trunks and on the Extended IP Phone.
• Not all features require LED indication. Hence the LED on a DSS Key is activated only if the feature
assigned to that key requires LED.
• For example, Call Pick-Up; this feature does not require an LED. So when a DSS key is assigned to
this feature, the LED of the key remains inactive, when Call Pick-Up is accessed.
• A feature like Auto Redial requires an LED to show that it has been set or canceled. So, the LED of the
DSS key to which the Auto Redial feature has been assigned will glow Red, when Auto-Redial is set,
and the LED is turned off when the feature is canceled.
• Thus the LEDs of the DSS keys function only if the LED is relevant for the feature/ function assigned to
the keys, and otherwise remain inactive for example, Raid, Interrupt Request, Barge-In, Last Caller
Recall.
Dial Pad
The dial pad consists of 12 fixed keys for the digits 0, 1-9, and the characters * and #. The dial pad is used for
dialing numbers of extensions, external parties, and for dialing the programming and feature access codes.
Speaker Key
The speaker key sets the phone in 'Speaker mode' for hands-free operation. The Speaker key is programmable,
you can program any other feature/function on this key.
Speaker Key LED
The Speaker Key on SPARSH VP248 is equipped with a single color LED which glows Blue when pressed for the
speaker mode and is turned off, when you exit the speaker mode.
Since key is programmable, the LED indication pattern will be according to the feature/function you assign to this
key. For example, if you assign an extension to this key, the LED of the key will function as a tri-color LED to show
status of the Extension. If you assign a feature that does not require any LED activity, like Call Pick-Up, the LED of
this key will remain inactive.
Volume Keys
• “ + ” (plus) : This is the increase key, to raise the volume of speech while talking or to increase the Ringer
volume, when the phone is ringing.
• “-” (minus) : This is the decrease key, to lower the volume of speech while talking or to decrease the
Ringer volume when the phone is ringing.
Violet When you are in speech with
Trunk (external call) When you have put a Trunk
on hold (external call) When any Trunk is calling
(external call)
LED
Color
LED Mode
Continuously ON Slow Blink Fast Blink