background image

1. MAKE SURE YOUR DETECTOR IS ON!
2. 

While pressing the white button on the headphones, switch the on-off button of the 

headphones to ''on'' position and do NOT let go of the white button until the beep indicating 

the battery status is heard.

3. 

Headphones will emit a number of beeps to indicate the battery status as follows: Five 

(5) beeps for fully charged battery, four (4), three (3), two (2) beeps to indicate diminishing 

charge and one (1) beep if the battery is low. When the battery is approaching full depletion, 

the headphones will start emitting continuous beeps at short intervals indicating an 

immediate need to charge the battery.

IMPORTANT! Disconnection and unpairing may occur when the battery is low! 
4. 

The blue LED on the other side will start blinking every 2 seconds.

5. 

Press the plus (+) and minus (-) buttons on your detector at the same time. A high beep 

will be heard. 

6. 

The blue LED on the headphones will start to blink every second, the wireless icon will 

appear on screen and the wireless headphones will pair with the detector.

7. 

Once the pairing is complete, the headphones and the detector will connect automatically 

at the next start-up.

8. 

Once the pairing is successful, if you experience any distortion in the audio or 

interference from another detector, change the channel by select the wireless connection 

setting on your detector and using the plus (+) and minus (-) buttons. Channels will change 

between 1-5. At 0 position, the wireless connection is off. When you are not using the 

wireless headphones, keeping the wireless setting at 0 position is recommended.

9. 

To adjust the volume, use the volume setting of the detector.

IMPORTANT! FOR OPTIMAL PERFORMANCE, BE SURE THAT THE

HEADPHONES' BLUE LED AND THE DETECTOR ARE ON THE SAME SIDE!

 Pairing Instructions for

2.4 GHz WIRELESS

HEADPHONES GREEN EDITION

Summary of Contents for GREEN EDITION

Page 1: ...s on your detector at the same time A high beep will be heard 6 The blue LED on the headphones will start to blink every second the wireless icon will appear on screen and the wireless headphones will pair with the detector 7 Once the pairing is complete the headphones and the detector will connect automatically at the next start up 8 Once the pairing is successful if you experience any distortion...

Page 2: ...NOT let go of the button until HP is displayed on the screen 6 When the pairing is successful the audio will be heard through the headphones and the blue LED will start to blink every second In addition the wireless icon will appear at the bottom right corner of the screen If the pairing is not successful the wireless icon will start blinking In such a case repeat the above steps 7 Once the pairin...

Page 3: ...he battery IMPORTANT Disconnection and unpairing may occur when the battery is low 4 The blue LED on the other side will start blinking every 2 seconds 5 Racer 2 and Gold Racer Turn the detector on while pressing the plus button and do NOT let go of the plus button for approximately 5 6 seconds Impact Turn the detector on while pressing the EXPERT button and do NOT let go of the EXPERT button for ...

Page 4: ... start flashing 7 Turn off the PulseDive and the headphones Then turn the headphones on first followed by the PulseDive Once the devices pair they will connect automatically at each start up IMPORTANT If your wireless headphones is already paired with another Nokta Makro metal detector other than PulseDive once you pair the headphones with the PulseDive you need to change the wireless channel of y...

Reviews: