Matrix NAVAN CNX200 System Manual Download

Page: 497 / 1388

Matrix NAVAN CNX200 System Manual

487

Mobile Trunks

This NAVAN variant supports 1 Mobile trunk port.

To configure,

Log into Jeeves as System Engineer.

Click the

Trunks

tab.

On the left navigation bar, click the

Mobile Trunks

link.

On this page following icons appear,

More:

Click this button to view all parameter links on the page.

Less:

Click this button to view only the essential parameter links on the page.

Expand:

Click to expand a link to display all parameters under the link.

Collapse:

Click to collapse a link. Hides all parameters under the link.

Copy

: Click to copy the parameters under a specific link of a page to the same link under another trunk

page.

Settings

: Click to configure the settings of a parameter further.

More link:

Click to view all additional parameters on the page.

To configure another mobile trunk, click the Trunk number (name) tab (if available).

To save settings, click

Submit

To assign default values to all the parameters of the trunk, click the

Default

button.

To copy the same mobile trunk parameter values to the other mobile trunks (if available), use the

Copy

button.

Summary of Contents for NAVAN CNX200













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NAVAN CNX200

Reviews:

Related manuals for NAVAN CNX200

Brands by name

Popular brands

Matrix NAVAN CNX200, System Manual

Search results

Summary of Contents for NAVAN CNX200

Reviews:

Related manuals for NAVAN CNX200

Brands by name

Popular brands