![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663073.webp)
Setup Guide for the RadioRA Chronos System Bridge
73
Section 6 - CCI Programming
Contact Closure Programming
Setting up a General Purpose Contact Closure Input for
Scene Control
Contact Closure Inputs 1 and 2 (CCI 1 and CCI 2) can be programmed to activate a unique lighting scene.
Follow the procedure below to program these closures.
Note:
The Contact Closure Inputs have a 15 second
delay after applying power, before the inputs may be used.
Step 1
Go to Contact Closure Setup
Main Menu
Contact Closure Setup
From
Contact Closure Setup
, select either
CCI 1
or
CCI 2
.
Step 2
Setup Contact Closure Type
Use
and
to set the type to Scene, only
if the type is not already set to Scene.
CCI 1 Setup
Set Type - - - - - - - -
Closure Settings
Scene
Back
Help
Assign Zones
Set Zone Levels
Step 3
Setup Closure Settings
From
CCI 1 (or CCI 2) Setup
, select
Closure
Settings
.
Use
and
to select either Momentary or
Maintained for the Closure Type.
Press
“Done” (
button)
to accept the setting.
Closure Settings
Closure Type
Cancel
Done
Maintained
Activate
Switch
Release
Switch
Switch
Open
Momentary Input Example
A Momentary switch closure will turn a
SCENE ON. The input SCENE remains ON
after the switch closure has been released,
until the status of a Dimmer or Switch in that
SCENE is changed.
Activate
Switch
Release
Switch
Switch
Open
A Maintained switch closure will turn an input
SCENE ON. Input SCENE remains ON until
the switch closure is released. When released,
the input SCENE returns to OFF.
Maintained Input Example