![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663039.webp)
Setup Guide for the RadioRA Chronos System Bridge
39
Section 3 - Button Programming
Advanced Local Programming
Step 3
Erase button
While the LED is fluttering, press the ALL OFF
or Lower button in the right most column.
Step 4
Complete Erasing Button
Programming
Simultaneously press the 2nd and 4th buttons
in the right most column until all LEDs begin
to flutter (approximately 3 seconds).
The LED will stop fluttering and begin to flash.
All Lighting Zone Controls will turn off, and
programming is now erased from that Master
Control button.
Note:
When erasing the ALL ON or ALL OFF
buttons, all Lighting Zone Controls will be
re-assigned to the buttons; therefore, they will
turn ON.
• Repeat Steps 2 and 3 for all Master Control but-
tons with programming to be erased.
Wall Master
Tabletop Master
OR
• Erasing Master Control button programming is
complete.