Setup Guide for the RadioRA Chronos System Bridge
79
Section 6 - CCI Programming
Contact Closure Programming
Testing Contact Closure Inputs
The Contact Closure Inputs may be manually toggled to allow for testing. Follow the procedure below to test the
Contact Closure Inputs.
Note:
The override function is only temporary. The actual CCI state will be restored
after leaving the Test CCI screen.
Step 1
Go to Contact Closure Setup
Main Menu
Contact Closure Setup
From
Contact Closure Setup
, select
CCI 1 Setup,
CCI 2 Setup,
or
Security Setup
.
Step 2
Enter Test Mode
CCI 2 Setup
Assign Zones
Set Zone Levels
Back
Help
Set Properties
Test CCI
Test CCI 2
CCI 2 State - Open
CCI 2 Scene - Off
Back
Override On
Type - Maintained
Temporary Override - Off
Use
and
to scroll down and select
Test
CCI
. Press
“OK”
to enter
Test Mode.
Press “Override On” (
button)
to toggle
the CCI states, or
press “Back” (
button)
to return to the previous menu.
Press “Back” (
button)
again to return to
the
Contact Closure Setup
menu to test
additional Contact Closure Inputs.
Note:
The override function is only temporary.
The actual CCI state will be restored after
leaving the Test CCI screen.
