![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663043.webp)
Setup Guide for the RadioRA Chronos System Bridge
43
Section 3 - Button Programming
Whole-home/Phantom Button Programming
Step 4
Select next Phantom Button
Press “Continue” (
button)
to display the list of
Phantom Buttons:
Note:
The system is still in Assignment Mode, as indi-
cated by the icon in the upper right hand
corner of the screen. The arrow on the right of the
screen indicates which Phantom Button is currently in
Assignment Mode.
Use the
and
buttons to select a Phantom
Button.
Press “Select” (
button)
to enter
Assignment Mode for the selected Phantom Button.
Repeat Steps 3 and 4 for any additional Phantom
Buttons.
Press “Exit” (
button)
to finish assigning zones.
• Proceed to Setting Light Levels/GRAFIK Eye
®
and GRAFIK RA
TM
Scene Selection for Phantom
Buttons on page 44.
Assign Zones
1. RM - Home
2. RM - Btn 2
3. RM - Btn 3
4. RM - Btn 4
Exit
Select