![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663094.webp)
Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
94
Ensure that the Chronos
TM
System Bridge is not
in Activate Controls Mode, or the ACTIVATE
REPEATER LED or ACTIVATE CONTROLS
LED on any Repeater is
NOT ON
before pro-
ceeding. If either LED is ON, press the corre-
sponding button until it's LED turns OFF
(approximately 3 seconds).
Returning Components to Default Factory Settings
Master Controls
Returning a Master Control to Default Factory Settings will
permanently delete all current program-
ming
information.
Do not do this unless you are sure that it is necessary.
For more information call
the
Lutron Technical Support Center.
Step 1
Begin returning to Default
Factory Settings
Step 2
Complete returning to Default
Factory Settings
While the 1st, 3rd, and 5th LED are flash-
ing,
press and hold the 2nd and 4th buttons in
the right most column until all the LEDs flash.
ALL ON
ALL OFF
ALL ON
ALL OFF
All LEDs will turn OFF, indicating that the
Master Control has been returned to Default
Factory Settings.
ALL ON
ALL OFF
Press and hold the 1st, 3rd and 5th buttons in
the right most column until the corresponding
LEDs begin to flash (approximately 3 sec-
onds).
ALL ON
ALL OFF
Wall Master
Tabletop Master
OR
ALL ON
ALL OFF
LEDs will flash for only 3 seconds.