![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663023.webp)
Setup Guide for the RadioRA Chronos System Bridge
23
Section 2 - System
Activation
Go to any Dimmer, Switch or GRAFIK
Eye
®
/GRAFIK RA
TM
Control Unit. Turn the
Dimmer or Switch ON or OFF by pressing the
tapswitch. On a
GRAFIK Eye/GRAFIK RA
Control Unit, change the selected scene by
pressing a scene button.
The light(s) that the Lighting Zone Control
operates will turn ON and OFF a few times
when it has been activated.
If a Lighting Zone Control fails to respond as
described above, consult the Troubleshooting
Guide
.
Step 4
Activate a Lighting Zone
Control
Dimmer
Switch
• Proceed to Step 5 when all Lighting Zone
Controls have been activated.
Note:
When a Lighting Zone Control is prop-
erly activated, the Zone Controls count on the
Chronos
System Bridge screen will increment
by one.
Activate one Lighting Zone Control at a time.
Wait for the control to flash its light(s) before
activating any remaining controls.
• Repeat Step 4 to activate any remaining
Lighting Zone Controls.
?
TRON
OR
Activating the System
Step 5
Complete Control Activation
Press “Done” (
button)
on the
Chronos
System Bridge OR press and hold the ACTI-
VATE CONTROLS button on any auxiliary
Repeater until the green ACTIVATE CON-
TROLS LED turns off (approximately 3 sec-
onds). The green ACTIVATE CONTROLS
LED on ALL auxiliary repeaters will turn off.
The AUXILIARY LED will remain on.
Step 6
Verify that all Controls have
been activated
From
System Setup
, select
Diagnostics
.
Use
or
to activate Flash Mode.
Master Controls
, if activated, will flash all
their LEDs. Make note of any Master Controls
that are not activated.
Diagnostics - System 1
Flash Mode - - - - - - - -
Beep Mode - - - - - - - - -
No
Back
Help
Global Beep Mode - - - -
No
No
Tabletop Master
Wall Master
GRAFIK
Eye/GRAFIK RA
Control Unit