![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663040.webp)
Setup Guide for the RadioRA Chronos System Bridge
40
Section 3 - Button Programming
Set Phantom Button Names
Phantom Buttons are "virtual" buttons that reside in the Chronos
TM
System Bridge and are used to activate light-
ing in a single system or both systems.
Whole-home Buttons are created by assigning Dimmers, Switches, or GRAFIK Eye
®
Control Units from 2 sys-
tems to a single Phantom Button.
Note:
If the
Chronos
System Bridge is not configured to bridge systems or to use RS-232, Phantom Buttons are
not available and this procedure does not apply.
Whole-home/Phantom Button Programming
Step 1
Go to Phantom Button Setup
If bridging two systems:
Main Menu
Whole-home Button Setup
Phantom Button Setup
If not bridging systems:
Main Menu
Phantom Button Setup
Step 2
Set Button Names
Phantom Button Setup
Set Button Names
The list of phantom buttons is displayed:
Use
and
to select the button to name, and
press “Select” (
button).
Phantom Button Setup
Set Names
Set Types to RM / SC
Assign Zones
Set Zone Levels
Back
Help
Select Button to Name
1. RM - Btn 1
2. RM - Btn 2
3. RM - Btn 3
4. RM - Btn 4
Back
Select
Using the
,
,
, and
keys, or an attached
keyboard, change the button name to the desired
name.
Press “Done” (
button)
when finished.
Set Name
Name: _ _ _ _ _ _ _ _
Cancel
Done
H o m
e