![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663024.webp)
Setup Guide for the RadioRA Chronos System Bridge
24
Section 2 - System
Activation
Lighting Zone Controls
, if activated, will
flash the light(s) they control. Make note of
any Lighting Zone Controls that are not acti-
vated.
After verifying that all Master Controls and
Lighting Zone Controls are activated, press
or
on the Chronos
TM
System Bridge to
set Flash to
No
OR press and hold the
FLASH button on any Repeater until the
green FLASH LED turns off
(approximately 3 seconds).
If any Master Control or Lighting Zone Control
has not been activated, repeat Steps 1
through 5, starting on page 21.
Activating the System
• Master Controls and Lighting Zone
Controls are now
activated.
• Repeat Activate Auxiliary Repeaters and
Activate Controls for System 2 if the
Chronos System Bridge is set up as a
bridge.
• When both systems have been activated,
proceed to Local Button Programming
Overview on page 25.