![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663075.webp)
Setup Guide for the RadioRA Chronos System Bridge
75
Section 6 - CCI Programming
Contact Closure Programming
Step 6
Set Actions
From
CCI Setup
select
Set Actions
.
Use
and
to change the value of the
selected setting. Use
and
to select the
next / previous setting.
Fade Time
determines the fade time of the
selected CCI. The options are Default (1 sec-
ond ON, 3 seconds OFF), 1 second, 3 sec-
onds, 10 seconds, 30 seconds, 1 minute, 4
minutes, and Legacy.
If the system contains Dimmers,
Switches, or GRAFIK Eye
®
Interfaces
that were manufactured prior to
January 1, 2001, the Legacy setting
MUST
be used.
Switches
determines whether any switches
for the selected CCI operate:
• First On / First Off (FO/FO)
• Last On / Last Off (LO/LO)
• First On / Last Off (FO/LO)
• Last On / First Off (LO/FO)
Repeat Steps 1-6 for any remaining Contact
Closure Inputs that need to be set up.
Press “Done” (
button)
when changes are
complete.
• Setting up a General Purpose Contact
Closure Input for Scene Control is com-
plete.
Set CCI Actions
Default
Fade Time - - - - - - -
Switches - - - - - - - -
Cancel
Done
FO/FO