![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663015.webp)
Setup Guide for the RadioRA Chronos System Bridge
15
Section 1 - Getting S
tarted
Installing the Chronos
TM
System Bridge
Using the LCD and Buttons
Basic Navigation
Navigation through the menu system is very simple. The
and
buttons are
used to highlight an item in a menu. The
OK
button is used to select the highlighted
item.
The
and
buttons are called soft keys. The function of the soft keys changes
as indicated by the text directly above them on the LCD. Examples of soft key func-
tions are “Back”, “Next”, “Help”, and “Cancel”.
The
button is used to return to the home screen from any other screen. When on
the home screen, pressing
will display the status screen.
Data Entry
There are 2 basic types of screens used for data entry.
On single-row edit screens, the
and
buttons are used to move from one
data field to another. The
and
buttons are used to change the value of the
data field.
On multi-row edit screens, the
and
buttons are used to move from one
data field to another. The
and
buttons are used to change the value of
the data field.
On screens where data is being edited, the soft keys will always be “Cancel” and “Done”. The “Done”
soft key must be used to confirm and accept changes.
Sleep Mode
When the
Chronos
System Bridge has been idle for 30 minutes, the LCD will go into Sleep Mode. At this
point, the LCD will turn off. A single press of any button will bring the LCD out of Sleep Mode.
Date
06
/ 17 / 2003
MM / DD / YYYY
Cancel
Done
Serial Port Settings
Baud Rate - - - - - -
Flow Control - -Hardware
9600
Cancel
Done
Prompt - - - - - - - ON
Error Reporting - - - OFF