Setup Guide for the RadioRA Chronos System Bridge
41
Section 3 - Button Programming
Set Phantom Button Types (ROOM or SCENE)
Note:
If the Chronos
TM
System Bridge is not configured to bridge systems or to use RS232, Phantom Buttons are
not available and this procedure does not apply.
Whole-home/Phantom Button Programming
Step 1
Set Button Types
If bridging two systems:
Main Menu
Whole-home Button Setup
Phantom Button Setup
Set Types to RM / SC
If not bridging systems:
Main Menu
Phantom Button Setup
Set Types to RM / SC
Use the
and
buttons to highlight a Phantom
Button.
Press “Select” (
button)
to change select-
ed button from ROOM to SCENE or SCENE to
ROOM.
Note:
Changing the button type will erase any pro-
gramming currently on the button. If there is program-
ming on the button, the following confirmation screen
will be displayed when
“Select” (
button)
is
pressed:
Press “Yes”
(
button)
to confirm the change, or
“Cancel” (
button)
to cancel the change.
Note:
The ALL ON and ALL OFF buttons (Phantom
Buttons 16 and 17) can only be SCENES.
Select Button to Set Type
1. RM - Home
2. RM - Btn 2
3. RM - Btn 3
4. RM - Btn 4
Back
Select
Are you sure?
Change Home
to Scene?
Yes
Cancel
CAUTION – THIS WILL ERASE ALL
PROGRAMMING ON THIS BUTTON
Step 2
Select Phantom Button
