![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663097.webp)
Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
97
Ensure that the Chronos
TM
System Bridge is not
in Activate Controls Mode, or the ACTIVATE
REPEATER LED or ACTIVATE CONTROLS
LED on any Repeater is
NOT ON
before pro-
ceeding. If either LED is ON, press the corre-
sponding button until it's LED turns OFF
(approximately 3 seconds).
Returning Components to Default Factory Settings
GRAFIK Eye
®
Interface and GRAFIK RA
®
Control Unit
Returning a
GRAFIK Eye
Interface or
GRAFIK RA
Control Unit to Default Factory Settings will
permanently delete all current programming information.
Do not do this unless you are sure that it is
necessary.
For more information call the
Lutron Technical Support Center.
Step 1
Remove faceplate
Step 2
Return to Default Factory
Settings
Press and hold the ON/OFF button until the
orange LED begins to blink (approximately 5
seconds).
The
GRAFIK Eye/GRAFIK RA
Control Unit
will turn ON and OFF a few times indicating
that the
GRAFIK Eye
Interface or
GRAFIK RA
Control Unit has been returned to Default
Factory Settings. Reattach the
GRAFIK Eye
Interface or
GRAFIK RA
Control Unit face-
plate.
Remove the faceplate from the
GRAFIK Eye
Interface or GRAFIK RA Control Unit.
ON/OFF
60 HZ
GRX Accessor
y
Control Address 15
1
234
COM
V+
MUX
MUX
WH
RED
YEL
BL
50 HZ
ON/OFF
60 HZ
GRX Accessor
y
Control Address 15
1
234
COM
V
+
MUX
MUX
WH
RED
YEL
BL
50 HZ