Setup Guide for the RadioRA Chronos System Bridge
62
Section 4 - T
imeclock Programming
Step 5
Select Scene to Activate
Use
and
to highlight a scene to activate.
Press
“Next” (
button)
to accept the selection.
Select Scene to Activate
1. Morning
2. Scene 2
3. Scene 3
4. Scene 4
Previous
Next
Step 6
Set Event Action
The Event Action settings determine what happens
when the event is activated.
Action
determines whether the scene is turned ON or
OFF.
Event Type
determines whether the event activates
the selected scene based on the Time Clock Mode.
•
Normal -
The event will activate in both
Home
and
Away
modes.
•
Home Only -
The event will activate only
when the mode is
Home
.
•
Away Only -
The event will activate only
when the mode is
Away
.
Note:
The activation time for an Away event will vary
in order to make the residence appear lived-in. The
Away event will activate within 20 minutes (+/-) of the
scheduled time.
Fade Time
determines the fade time of the selected
scene. The options are Default (1 second ON, 3 sec-
onds OFF), 1 second, 3 seconds, 10 seconds, 30 sec-
onds, 1 minute, 4 minutes, and Legacy.
Event Action
Action - - - - - - - - - - - - -
Event Type - - - - - - -
Fade Time - - - - - - -
Switches - - - - - - - -
Previous
Finish
Normal
Scene ON
Default
FO/FO
Astronomical Time Clock Programming
If the system contains Dimmers that were manufac-
tured prior to January 1, 2001, the Legacy setting
MUST
be used.
Switches
determines whether any switches in the
selected scene operate:
• First On / First Off (FO/FO)
• First On / Last Off (FO/LO).
• Last On / First Off (LO/FO)
• Last On / Last Off (LO/LO).
Repeat Steps 1-6 to create additional Time Clock
Events.
Press “Finish” (
button)
to accept the changes.
• Time Clock Event Programming is now complete.
