![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663092.webp)
Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
92
Adding a Switch Closure Input, RS-232, or IR Interface
Step 1
Begin Interface activation
From a Repeater:
Press and hold the ACTIVATE CONTROLS
button on
any
Repeater until the green ACTI-
VATE CONTROLS LED turns ON (approxi-
mately 3 seconds).
The green ACTIVATE CONTROLS LED on
ALL
Repeaters will turn ON.
The Switch Closure Interface has a 15 second
delay after applying power. During this time the
Power LED will blink. When the Power LED
stays ON, the unit is ready for operation.
Activating a Switch Closure Input Interface, RS-232
Interface, or Infrared (IR) Interface
From the Chronos
TM
System Bridge (as a Main
Repeater only):
Main Menu
System Setup
From
System Setup
, select
Activate Controls
The number of devices and Master Controls currently
in the system is displayed. These numbers will
update as new Zone Controls and Master Controls
are activated. The green ACTIVATE CONTROLS LED
on
ALL
Auxiliary Repeaters will turn ON.
Activate Controls
Begin Activating
Controls in System 1
Zone Controls - - - - - - - -0
Help
Done
Master Controls - - - - - - 0
System Setup
Activate Aux Repeaters
Activate Controls
Address Usage
Diagnostics
Back
Help