![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663084.webp)
Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
84
Viewing Address Usage and Detecting Missing Devices
The Address Usage screen is a useful tool that shows the total number of Repeater, Lighting Zone Control, and
Master Control addresses allocated in the system. This can be helpful in system setup and in troubleshooting.
Note:
If the Chronos
TM
System Bridge is not set up as a Main Repeater, or to bridge systems, this section does
not apply.
Diagnostic Tools
Step 1
Go to System Setup
Step 2
Query for Addressed Devices
If all devices are accounted for,
pressing “Continue”
(
button)
will return to
Address Usage
.
If all devices are not accounted for:
Zone Controls and Repeaters
Proceed to Step 3 on the next page.
Master Controls
Missing Master Controls may be attributed to Cordless
Master Controls that are asleep.
Pressing
“Continue” (
button)
will bring up the following
screen:
Wake up any Cordless Master Controls by pressing
any button on the Control.
After all Cordless Master Controls have been awak-
ened,
press “Requery” (
button)
to query the sys-
tem again.
If all devices are accounted for,
pressing “Continue”
(
button)
will return to
Address Usage
.
If all devices are
not
accounted for,
press “Done”
(
button)
to proceed to the next step.
Missing Master Controls
1 Master Control in
Requery
Done
System 1 is missing.
Wake up any Cordless
Master Controls now.
The
Chronos
System Bridge can query the system for
devices to see if any addressed devices are missing.
From
Address Usage
, use
and
to highlight
Auxiliary Repeaters
,
Zone Controls
, or
Master
Controls
to query.
Press “Query” (
button)
to
query the system. The
Chronos
System Bridge will
query the system and display the results.
Note: “Query” (
button)
will only be available
when one or more of the selected device type
have been activated.
Querying System 1
Master Controls...
Querying for
System 1 Query Results
Requery
Continue
Master Controls.
Found 5 of 6
Main Menu
System Setup
Address Usage
Note:
If the
Chronos
System Bridge is configured to
bridge systems, the
Main Menu
will contain a
System
1 Setup
and a
System 2 Setup
. These steps should
be repeated for both systems.
Address Usage
Auxiliary Repeaters - - - 2
Zone Controls - - - - - - - 17
Master Controls - - - - - - 6
Back
Query