![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663045.webp)
Setup Guide for the RadioRA Chronos System Bridge
45
Section 3 - Button Programming
While setting light levels
•
GRAFIK Eye
Control Units assigned to a
ROOM Phantom Button cannot be turned
OFF.
•
GRAFIK Eye
Control Units not assigned to
this Phantom Button cannot be turned ON.
Step 4
Select a GRAFIK Eye
®
scene
For ROOM Phantom Buttons, select one of
the Scenes (1 through 4) on a
GRAFIK Eye
Control Unit by turning that Scene ON.
For SCENE Phantom Buttons, select one of
the Scenes on a
GRAFIK Eye
Control Unit by
turning that Scene ON OR select the Off
Scene on the
GRAFIK Eye
Control Unit if it is
to be turned OFF when the Phantom Button is
activated.
Step 5
Select next Phantom Button
Press “Continue” (
button)
to display the list of
Phantom Buttons:
Note:
The system is still in Level Set Mode, as indi-
cated by the icon in the upper right hand corner of the
screen. The arrow on the right of the screen indicates
which Phantom Button is currently in Level Set Mode.
Use the
and
buttons to highlight a Phantom
Button.
Press “Select” (
button)
to enter Level
Set Mode for the highlighted Phantom Button.
Repeat Steps 3 and 4 for any additional Phantom
Buttons.
Press “Exit” (
button)
to exit Level Set Mode.
• Proceed to Setting Button Properties for
Phantom Buttons on page 46.
Set Zone Levels
1. RM - Home
2. RM - Btn 2
3. RM - Btn 3
4. RM - Btn 4
Exit
Select
Whole-home Button Programming