Setup Guide for the RadioRA Chronos System Bridge
71
Section 5 - RS-232 Programming
Assign an Infrared Interface or RS-232
Interface to a Control Number by pressing the
Up or Down button on the interface until the
ALL ON (SCENE 16) is on the interface’s dis-
play. After the ALL ON (SCENE 16) is on the
display, press and release the Select button.
When a Master Control is assigned, the
screen will change to:
Press “Continue” (
button)
to continue
assigning Control Numbers.
Repeat steps 2 and 3 for any remaining
Control Numbers to be assigned.
Press “Done” (
button)
to return to
Device Number Setup
.
• Master Control Numbers are now
assigned.
Assign Control Numbers
Continue
successfully.
Control has been assigned
If the wrong Master Control / Interface is
assigned to a Control Number, simply assign
the correct Master Control / Interface to the
Control Number.
RS-232 Port Programming
Assign Control Numbers
1
Help
Done
Control is Assigned
Control Number - - - - - -
