Setup Guide for the RadioRA Chronos System Bridge
65
Section 4 - T
imeclock Programming
Step 1
Go to Set Home / Away Mode
Setting the Time Clock Home / Away Mode
The time clock built into Chronos
TM
System Bridge has two modes – Home and Away. These allow the time clock
to run certain events only while the homeowner is out, so that it appears someone is in the house. Convenience
events, such as a morning scene, can be set to only run while someone is there.
Astronomical Time Clock Programming
Use
and
to change the Time Clock Mode set-
ting.
Press “Cancel” (
button)
to return to
Time
Clock Setup
.
Press “Done” (
button)
to accept
the mode setting.
The Time Clock Home / Away Mode can also be
changed from the Chronos Status screen. This screen
is accessed by pressing
(Home Button)
from the
Home Screen.
Note:
If the Time Clock Mode is being controlled by
one of the Contact Closure Inputs, changes will not be
allowed from this screen. The following message will
be displayed:
For details on programming a Contact Closure Input
to control Time Clock Home / Away Mode, see page
76.
• Time Clock Mode is now set.
Set Home / Away Mode
Runs only Home and
Normal Time Clock Events.
Home
Cancel
Done
Set Mode
Runs only Home and
Normal Time Clock Events.
Home
Cancel
Done
Note: CCI 1 is
currently controlling the
Time Clock Mode.
Press OK to Continue.
Main Menu
Time Clock Setup
Set Home / Away Mode