Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
93
Adding a Switch Closure Input, RS-232, or IR Interface
Step 3
Complete Interface activation
Press “Done” (
button)
on the Chronos
TM
System Bridge OR press and hold the ACTI-
VATE CONTROLS button on any auxiliary
Repeater until the green ACTIVATE CON-
TROLS LED turns off (approximately 3 sec-
onds). The green ACTIVATE CONTROLS
LED on ALL auxiliary repeaters will turn off.
The AUXILIARY LED will remain on.
• The Interface is now activated.
• To program the input channels on the Switch
Closure Input Interface, refer to the RadioRA
®
Setup Guide (P/N 044-001).
The green ACTIVATE CONTROLS LED on
ALL
Repeaters will turn OFF. The MAIN or
AUXILIARY LED will remain on.
Step 2
Activate Interface
• All input LEDs will flutter, then
•
Switch Closure Input Interface:
the Flash LED and Input 1 LED will alter-
nately flash.
RS-232 or IR Interface:
the top and bottom
row of the display will alternately flash.
Press any button.
Input 4 LED will remain ON when the Switch
Closure Input Interface has been activated.
Display will flash 01 when the RS-232 Interface
or IR Interface are activated.
