Setup Guide for the RadioRA Chronos System Bridge
14
Section 1 - Getting S
tarted
Replace the cover by inserting the two tabs
on the back of the cover into the slots on the
Chronos
System Bridge.
Gently press down on the front edge to
engage the snaps.
Step 6
Plug in the AC Adapter to wall
receptacle
Plug the AC Adapter into a 120 V ,
50/60 Hz wall receptacle.
If the Power LED above the power jack
labeled “PWR IN” is not on when powered,
ensure that the AC adapter is installed prop-
erly and that there is power at the receptacle.
If problem persists, call the Lutron Technical
Support Center at (800) 523-9466.
?
Installing the Chronos
TM
System Bridge
Step 5
Plug in the AC Adapter to the
Chronos System Bridge
Power
Jack
Note:
When the
Chronos
System Bridge is
powered up for the first time, the following
screen should be shown on the LCD:
Chronos Configuration
Main Repeater - - - - - - -
Bridge Systems - - - - - -
RS-232 Interface - - - - -
Help
Done
No
No
No
Step 7
Replace port cover
