![background image](http://html1.mh-extra.com/html/lutron-electronics/radiora-ra-sbt-chr/radiora-ra-sbt-chr_setup-and-installation-manual_1950663086.webp)
Section 8 -
Additional Info
Setup Guide for the RadioRA Chronos System Bridge
86
Viewing Device Information
Device Information Mode is used to display information about system devices.
Diagnostic Tools
Step 1
Enter Device Information
Mode
From the Chronos System Bridge:
Device Information Details:
Repeaters
Type
• Main Repeater or Auxiliary Repeater
System
• 1, 2, or Unaddressed
Address
• 1, 2, 3, or Unaddressed
Master Controls
Type
• Master Control
System
• 1, 2, or Unaddressed
Address
• 1-12, or Unaddressed
Control Number
• The RS232 device number used for identifying the
device to external equipment, or Unassigned.
Button Number
• 1-17
Button Type
• Local SC (Scene) or Local RM (Room)
• All On
• All Off
• Linked
• No Pgm (not programmed)
Linked To
(Note: This will be displayed only if the button type is
Linked.)
• Phantom “N” (where N is the Whole-home Phantom
Button that the Master Control Button is linked to)
Zone Controls
Type
• Zone Control
System
• 1, 2, or Unaddressed
Address
• 1-32 or Unaddressed
Zone Number
• The RS232 device number used for identifying the
device to external equipment, or Unassigned.
Main Menu
System Setup
Device Information
Press “Next” (
button)
on the Chronos
TM
System Bridge to enter Device Information
Mode.
To display information about a particular
device, press any button on the device. The
Chronos
System Bridge will update the device
information and then display the results.
System Setup
Activate Controls
Address Usage
Diagnostics
Cancel
Next
Device Information
Device Information
Back
Help
To obtain device
information, press
any device now.
Device Information
Type - - - - Master Control
System - - - - - - - - - - - - -
Address - - - - - - - - - - - -12
Back
Help
1
Control Number - - - - - - - 2
Device Information
Back
Help
Updated!
Step 2
Get Device Information