Setup Guide for the RadioRA Chronos System Bridge
25
Section 3 - Button Programming
Local Button Programming Overview
Button Programming Overview
1. Select a Master Control to be Programmed
2. Set Columns
Each column of buttons on a Master Control can be programmed to be either ROOM or SCENE but-
tons. All button columns are factory set as ROOM buttons. Refer to Rooms and Scenes Overview (page
26) for an explanation of Rooms and Scenes. Refer to pages 28-29 for details on assigning a column of
buttons as ROOMS or SCENES.
3. Program ROOM and SCENE Buttons
Each button on a Master Control can be programmed to affect any or all of the Lighting Zone Controls in
the system.
a. Assign Controls
By default, ROOM and SCENE buttons have no controls assigned to them. To assign controls to
each button, perform the steps detailed on pages 30 and 31. Assign all Lighting Zone Controls that
will be affected by the button being programmed. For SCENE Buttons, also assign all Lighting Zone
Controls that will be turned OFF by the button being programmed.
b. Set Light Levels
Lighting Zone Controls assigned to each button may be set to desired light levels to fit the mood or
activity programmed. To set light levels for each button, perform the steps detailed on pages 32 and
33. Dimmer light levels default to 100% for ROOM Buttons and 50% for SCENE Buttons. Switches
default to ON and GRAFIK Eye
®
/GRAFIK RA
TM
Control Units default to Scene 1.
4. Program ALL ON and ALL OFF Buttons
ALL ON Buttons always turn ON Dimmers (to 100%), Switches, and
GRAFIK Eye/GRAFIK RA
Control
Units (to Scene 1). ALL OFF Buttons always turn these controls OFF. By default, all Lighting Zone
Controls are assigned to all of the ALL ON and ALL OFF Buttons. To unassign controls from the ALL ON
and ALL OFF Buttons, perform the steps detailed on pages 34 and 35.
5. Repeat for all Master Controls
Advanced Local Button Programming
To copy Local Button programming from one Master Control to another, perform the steps detailed on
page 36.
To clear Local Button programming, perform the steps detailed on pages 38 and 39.
