manualshive.com logo in svg
background image

Your kit contains a Power Adapter, an Outlet Module, an Ethernet cable 
(colors may vary), and a Gateway.

Quickstart Guide for Outlet Modules

Serial Number:

MAC Address:

Gateway

Outlet

Module

Ethernet

Cable

Write down the serial number and the MAC address from the back of the 
Outlet Module. You don't need to record the numbers on your Gateway.

Power

Adapter

Page 1

I.

Unpack your new equipment

II.

Record identification numbers

01234

0025790123456789

2

1

2

1

$Id: page1.svg 4381 2012-01-08 22:19:10Z martini $

Содержание OMM-120-15

Страница 1: ...er MAC Address Gateway Outlet Module Ethernet Cable Write down the serial number and the MAC address from the back of the Outlet Module You don t need to record the numbers on your Gateway Power Adapter Page 1 I Unpack your new equipment II Record identification numbers 01234 0025790123456789 2 1 2 1 Id page1 svg 4381 2012 01 08 22 19 10Z martini ...

Страница 2: ... the Gateway If the Ethernet cable is plugged in correctly you ll see a solid green light on the left of the Ethernet port and a blinking yellow light on the right The green status light on top of the Gateway will come ON while it connects with CORIS servers Once successful the status light will go OFF It will blink once in a while as it talks to the servers 2 1 3 The Gateway and the Outlet Module...

Страница 3: ...switched on It will be red if the outlet is turned off Once the link is successful you can move the Module to its final location Check the status light to make sure it s still talking to the Gateway Go to http www corisecs com customer Log in if you have an account or click on Register Fill in the requested information Click SUBMIT 2 1 3 Very Important Your registration is not yet complete Check y...

Страница 4: ... My Devices Click on Add Module Enter the serial number and MAC address from the back of your Module along with a name and description 2 1 3 Click on Save You ll see a new window with your Module s information 4 Plug an electrical device into your Module Click on My Devices and select the module you just added Make sure the window is open to the Status page You can now toggle your device off and o...

Отзывы: