National Instruments MXI-Express Gen-3 x16 User Manual Download

Page: 1 / 38

USER MANUAL

MXI-Express Gen-3 x16

MXI-Express Gen-3 x16 Multisystem eXtension Interface for PCI
Express, CompactPCI Express, and PXI Express Bus Systems

This document provides installation, configuration, and reference information for MXI-
Express Gen-3 x16 controllers.

Caution

This icon denotes a caution, which advises you of precautions to take to

avoid injury, loss of data, or a system crash.

Caution

Using the MXI-Express Gen-3 x16 controllers in a manner not described

in this document may impair the protection the controllers provide.

Contents

Equipment Needed.......................................................................................................... 11

Unpacking............................................................................................................................... 11
Hardware Installation..............................................................................................................12

LED Indicators........................................................................................................................18

PXI Express Onboard LEDs........................................................................................... 19
PCIe-8398 Onboard LEDs.............................................................................................. 21

Software Installation and Configuration................................................................................. 22

Summary of Contents for MXI-Express Gen-3 x16







































Search results

Summary of Contents for MXI-Express Gen-3 x16

Reviews:

Related manuals for MXI-Express Gen-3 x16

Brands by name

Popular brands

National Instruments MXI-Express Gen-3 x16, User Manual

Search results

Summary of Contents for MXI-Express Gen-3 x16

Reviews:

Related manuals for MXI-Express Gen-3 x16

Brands by name

Popular brands