www.e-t-a.de
1
CPC12EN bus controller
(
ControlPlex
®
)
2116
7
Description
The customers' demands for a constant quality of the produced
goods while at the same time increasing the quantities, pose great
challenges to the mechanical and plant engineering industry. At
the same time, globalisation is creating worldwide value flows and
production chains. Machines and plants that had still been regionally
organised just a few years ago are now cross-linked worldwide.
These developments extend the requirements of machine and plant
control as well as of the installed components. An ever growing
number of measuring data need to be recorded, analysed, evaluated
and saved. This increases the transparency of the manufacturing
process and thus system availability.
The DC 24 V power distribution is also affected by this development.
The control voltage supplies all essential components of the machine
or system. These include, besides programmable control units,
actuators and sensors. Therefore, the control voltage has a special
importance in the entire production process. Its availability and
stability is crucial for system availability and quality of the produced
goods. The REX system meets these requirements. It consists
of electronic circuit protectors which are connected with each
other via an integral connector sleeve without requiring additional
components. Power supply is via the EM12 supply module which
can supply the circuit protectors with max. 40 A. The new CPC12 bus
controller additionally allows access to all system-relevant data of the
superordinate control systems. This is done via the the EtherNet/IP
interface as well as via an additional Ethernet interface.
The CPC12 bus controller connects the circuit protectors with the
superordinate control unit. Its internal
ELBus
®
interface realises the
connection with the electronic intelligent circuit protectors of the
REX system. The CPC12 bus controller allows entire access on all
required parameters of the intelligent circuit protectors, their control
unit and the visualisation of the device data.
This is provided at the field bus interfaces for the superordinate
control unit and also at the third RJ45 interface for further connection.
Thus, the system offers a fully parametrisable protection of the DC
24 V circuits and ensures selective overcurrent protection of sensors
and actuators, decentralised peripheral sub-assemblies etc. and their
supply lines.
Features
Your benefits
l
Control, diagnosis and monitoring via EtherNet/IP
l
Fully fledged EtherNet/IP communication interface
l
Fully fledged Ether communication interface (web server)
l
Updateable via web server
l
Combination of supply modules, overcurrent protection and
power distribution
l
For the intelligent circuit protectors of the REX system
l
Variable configuration of up to 32 channels with 16 devices
l
No accessories required for connecting the components
l
Connection via push-in terminals
l
Profitability through extremely reduced wiring time
l
Reduction of planning, design and installation time
l
Simple maintenance, diagnosis and system expansion
l
Increases machine uptime through clear failure detection and
stable power supply
l
Reduces downtimes through quick error resolution
l
Simplifies planning through clear planning sizes
l
Saves costs and time through fast and flexible mounting
including integral power distribution solution
CPC12EN
Approvals and certificates
Conformity
Approval
authority
Standard
File certifi-
cate no.
Rated voltage
UL
UL 2367
E306740
DC 24 V
UL
UL 508 Listed
CSA C22.2
No. 14
E492388
DC 24 V
Approvals for EM-accessories: see technical data of accessories.
Downloads
Data sheet/Certificates of conformity/Brochure/CAD data etc. are
available on our web page.
Please observe the separate user manual/installation manual:
CPC12EN-T1
www.e-t-a.de/qr1045/
(With regard to the devices of the REX system...)
