LG-Nortel IP LDK-20 Programming Manual Download Page 17

Page: 17 / 581

IP LDK-20 Programming Manual Abbreviation and Keywords Table

Abbreviations and Keywords Table

Abbreviation / Keywords

Full Spelling

Description

[CALLBK] or [CB] or [CALLBACK]

The fixed button for the call back function.

[CONF]

The fixed button for the conference function.

[DND] or [FWD] or [CFW] or [FOR] or
[DND/FWD]

The fixed button for the DND and call forward function.

[FLASH]

The fixed button for the flash function.

[HOLD] or [SAVE] or [HOLD/SAVE]

The fixed button for the hold and save function.

[ICM] or [Intercom]

The fixed button for the intercom function.

[MON]

The fixed button for the on-hook and off-hook function.

[MUTE]

The fixed button for the (speech) mute function.

[REDIAL]

The fixed button for the redial function.

[SPD] or [SPEED]

The fixed button for the speed function.

[TRANS] or [TRANS/PGM]

The fixed button for the transfer and ADMIN program function.

[UP]/[DOWN] or [VOLUME UP]/[VOLUME
DOWN]

The fixed button for the volume up and down function.

{COL}

The flexible button for CO line access function about one CO line.

{LOOP} or LOOP

The flexible button for CO line access function about all accessible CO lines.

{POOL} or {CO Group}

The flexible button for CO line access function about CO group.

Absent Text Message

The software service of displaying the absent reason of person on station LCD.

Account Code or Authorization Code

The password to check the authority of user.
'Authorization Code' is used as a synonym in this document.

ACD

Automatic Call Distribution

The software service of hunt call distribution method.

ACNR

Auto Call Number Redial

The software service that makes a redial call automatically.

ADMIN (program)

Administration

The data base programming mode of the keyphone system.

AOC

Advice Of Charge

The outgoing call cost charging service in the public ISDN.

Assign Attendant

The operator station assignment.

ATD or Attendant (Station)

Attendant Station

A telephone operator of IP LDK.

Attendant Recall

The software service of the call routing to attendant about the unanswered call.

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands