LG-Nortel IP LDK-20 Programming Manual Download Page 171 | Manualshive

Page: 171 / 581

background image

IP LDK-20 Programming Manual System Feature

155

2.13.8 Day/Night service

Description

When a CO call come in the system, the destination of CO call can be changed according to the time.
Such event is happened because the ring mode can be changed according to the time.
There  are  5  ring  modes  –  Day  mode/Night  mode/Weekend  mode/On-demand  mode/Automatic  Ring
mode.  The  destination  of  CO  call  can  be  set  differently  at  each  ring  mode,  while  a  user  sets  the
destination of CO call with ADMIN program(see Ref.1). At Day mode/Night mode/Weekend mode, the
user set the appropriate destination of CO call according to the situation( day or night or weekend ).
On-demand  mode  among  the  ring  mode  is  used  to  supply  a  different  destination  of  CO  call  except
Day mode/Night mode/Weekend mode.
The  ring  mode in Automatic  Ring  mode is  classified  as  Day  mode  or  Night  mode or Weekend  mode
according to Weekly Time Table(ADMIN program 233)
Only attendant  can change  the  ring  mode.  If  a user  presses  the

[DND/FOR]

button at the attendant

station, the ring mode will be changed to Day -> On-demand -> Night -> Weekend -> Automatic Ring
mode -> Day in sequence.

Operation

To change Day / On-demand / Night / Weekend / Automatic Ring mode,

1. Whenever pressing the

[DND/FOR]

button at the attendant station, the ring mode will be

changed to
Day -> On-demand -> Night -> Weekend -> Automatic Ring mode -> Day in sequence.

To activate automatic ring mode with Attendant Programming Mode,

1. Press the

[TRANS/PGM]

button.

2.

Dial

0 7 4

.

3.

Dial

1

and press the

[HOLD/SAVE]

button to activate Automatic ring mode.

To deactivate automatic ring mode with Attendant Programming mode,

1.

Press the

[TRANS/PGM]

button.

2.

Dial

0 7 4

.

3.

Dial

0

and press the

[HOLD/SAVE]

button to deactivate Auto ring mode.

4.

The type of time will be changed to the previous type of time.

Condition

1. The default value of Weekly Time Table is as follows( entry number : 00 ). The first table entry (00)

is for main attendants and others (01~15) are for intercom tenancy group attendants.

Date

Day Start

Time

Night Start Time

Weekend Start Time

Mon

09:00

18:00

-- : --

Tue

09:00

18:00

-- : --

Wed

09:00

18:00

-- : --

Thu

09:00

18:00

-- : --

Fri

09:00

-- : --

18:00

Sat

-- : --

-- : --

00:00

Sun

-- : --

-- : --

00:00

«
...
169
170
171
172
173
...
»

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IP LDK-20

Brand: Panasonic Pages: 96

Brand: Panasonic Pages: 274

Brand: Tokyo Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands