IP LDK-20 Programming Manual Quick
ADMIN Programming table
526
PGM FLEX
ITEM
RANGE
DEFAULT
REMARK
18
DSS Indication
Enable / Disable
Disable
If this value is set to ENABLE, LED indication
of
{CO}
button or
{DSS}
button is blocked.
(i.e. LED does not flash even if there is
incoming call to the assigned CO Line or
Station.)
This feature is not applied for direct call such
as DID/DISA.
19
UK billing mode
ON/OFF
OFF
If this value is set to ON, UK Billing Mode is
applied. (UK only)
20
COS 7 when auth fail
ON/OFF
OFF
If this value is set to ON, station’ COS will be
changed to 7 when invalid authorization code
is entered.
161
21
5 Digits Auth Code usage
ON/OFF
OFF
Authorization code length code can be chosen.
162
-
ADMIN Password
4 Digits
-
ADMIN password can be assigned to enter
ADMIN Programming mode for only
Administrator who knows the ADMIN
password. It is not assigned by default.
1
Alarm Enable
ON / OFF
OFF
If this value is set to ON, Alarm is available.
2
Alarm Contact Type
CLOSE / OPEN
CLOSE
3
Alarm Mode
ALARM / BELL
ALARM
163
4
Alarm Signal Mode
RPT / ONCE
RPT
If this value is set to REPEAT, the Alarm Signal
is repeated until Alarm Reset.
164
1-5
Attendant Assignment
STA No.
1 : 10
Maximum 5 Attendants can be assigned
including the Main Attendants and System
Attendant. The system attendant is different
from main attendant in aspect of the call
handling and system management priority. The
system attendant has more powerful priority
than main attendant. The system and main
attendants can be assigned to each 1 and
maximum 4. So the sum of system and main
attendants should be le
ss than 5. As default, the System Attendant is
assigned to Station 101, and others are not
assigned.
-
Auto Attendant
User may set the number of the VMIB
announcement for auto attendant.
1
Auto Attendant Usage
ON / OFF
OFF
If this value is set to ON, Auto Attendant is
activated.
165
2
Auto Attendant VMIB Annc.#
00-70
00
(not_asgn)
This value is the number of VMIB
announcement played when Auto Attendant is
activated.
CO-to-CO COS
1-9
1
When an external user of DID/DISA/TIE line
tries to access another CO Line in the system,
CO-to-CO COS is applied. The attributes of
CO-to-CO COS are the same as the station
COS.
1
Day COS
1-9
1
Class-of-Service of Day Mode
166
2
Night/Weekend COS
1-9
1
Class-of-Service of Night / Weekend Mode
Summary of Contents for IP LDK-20
