IP LDK-20 Programming Manual ADMIN Programming
392
4.6.2.2.5 VMIB Announce 2 Repeat Timer
Description
This is used to repeat VMIB announce 2 when the timer is expired. (000: Not repeat).
Value : 000~999
PROCEDURE
+ 191 + Hunt Group NUMBER + + Value(sec) +
4.6.2.2.6 VMIB Announce 2 Repeat Enable/Disable
Description
This value is used to enable or disable VMIB Announce 2 Repeat.
Value : ON=1 / OFF=0
PROCEDURE
+ 191 + Hunt Group NUMBER + + 1(On) +
4.6.2.2.7 Overflow Destination
Description
The call to a station in the group will continue to route until answered or each station in the group has
been tried. The call will remain at the last station in the group or will be passed to this overflow
station/group/ VMIB/System Speed bin, after overflow timer expiring. The overflow timer can be set at
ADMIN program 191 – FLEX 8.
Value : 1~4(Destination Type)
- 1
: STA #
- 2
: Hunt #
- 3
: VMIB 00~70(00: Note Assigned)
- 4
: System Speed # (2000~2499)
PROCEDURE
+ 191 + Hunt Group NUMBER + + Value(Destination Type)
+ Value (STA/Hunt Group/VMIB/Speed Bin) +
Summary of Contents for IP LDK-20
