IP LDK-20 Programming Manual Quick
ADMIN Programming table
537
10
No Answer Timer
00-99
15
(sec)
In circular/terminal hunt, if the
incoming call is not answered during
this time, the call is routed to the next
idle station in the group.
11
Pilot Hunt
ON / OFF
ON
If this value is set ON, the call to the
each hunt group member is
processed as the call to hunt group.
A circular/terminal hunt group can be
assigned with a pilot number (the
station group) so that only calls to the
pilot number will hunt.
12
Alt If No Member
ON / OFF
OFF
If there is no member on duty,
intercom call will be dropped and CO
incoming call will be routed to
overflow destination, or to ring
assigned station if overflow
destination is not assigned.
13
Music Source
0 - 8
00
(Not Assigned)
If music source is assigned, calling user
will be heard music instead of ring back
tone.
14
Alternate
Destination
Station/Hunt Grp
-
When a call is received in the group
and there is no available station in the
group, then the call will be routed to this
destination if assigned
Circular
Group
/
Terminal
Group
15
Max Queue Call
Count
00-99
99
This value is the maximum call count
that can be queued.
If the total queued call count is this
value, the next queuing tried call will be
disconnected.
1
VMIB Announce
1 Timer
000-999
(3 digits)
015
(sec)
If the call doesn’t answered during this
timer, the system plays VMIB
announcement that is programmed at
ADMIN program 191 – FLEX 3.
2
VMIB Announce
2 Timer
000-999
(3 digits)
000
(sec)
The second VMIB announcement can
be played if the call continues to wait
beyond the 2nd announcement timer.
The played VMIB announcement can
be programmed at ADMIN program
191 – FLEX 4.
3
VMIB Announce
Location 1
00-70
00
(Not Assigned)
This is used to play VMIB
announcement, when the VMIB
announce 1 timer is expired.
4
VMIB Announce
Location 2
00-70
00
(Not Assigned)
This is used to play VMIB
announcement, when the VMIB
announce 2 timers is expired.
This second VMIB announcement can
be played repeat, according to ADMIN
program 191 – FLEX 5 and 6 value.
5
VMIB Announce
2 Repeat
000-999
000
(sec)
This is used to repeat VMIB announce
2 when the timer is expired. (000: Not
repeat).
191
UCD
Group
6
VMIB Announce
2 Repeat E/D
ON / OFF
OFF
This value is used to enable or disable
VMIB Announce 2 Repeat.
PGM ITEM FLEX
SUB ITEM
RANGE
DEFAULT
REMARK
Summary of Contents for IP LDK-20
