LG-Nortel IP LDK-20 Programming Manual Download Page 58

Page: 58 / 581

IP LDK-20 Programming Manual System Feature

2.3.1.1 Call Forward, Unconditional

Description

A user forwards all calls immediately to other station, Hunt Group or VMIB.

Operation

To activate Unconditional Call Forward,

1. Lift the Handset or press the

[MON]

button.

2. Press the

[DND/FOR]

button.

3. Dial Call Forward Code 1.
4. Dial station or group pilot number to receive the calls.
5. Replace the handset and go on-hook.

To assign

{CALL FORWARD}

button at a flexible button,

1. Press the

[TRANS/PGM]

button.

2. Press a flexible button.
3. Press the

[DND/FOR]

button.

4.    Assign Call Forward Type (1)
5.    Dial the destination to receive the call.
6.    Press the

[HOLD/SAVE]

button.

To deactivate Call Forward,

1. Lift the handset or press the

[MON]

button.

2. Press the

[DND/FOR]

button.

3. Dial Call Forward Cancel Code #.

2.3.1.2 Call Forward, Busy

Description

When the station user’s line is busy.

Operation

To make call forward,

1. Lift the handset or press the

[MON]

button.

2. Press the

[DND/FOR]

button.

3. Dial a Call Forward type code:

4. Dial station, group number or # (VMIB) to receive the call.

To assign

{CALL FORWARD}

button at a flexible button,

1. Press the

[TRANS/PGM]

button.

2. Press a flexible button.
3. Press the

[DND/FOR]

button.

4. Assign Call Forward Type (

)

5. Dial the destination to receive the call.
6. Press the

[HOLD/SAVE]

button.

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands