LG-Nortel IP LDK-20 Programming Manual Download Page 566

Page: 566 / 581

IP LDK-20 Programming Manual Quick

ADMIN Programming table

550

PGM FLEX

ITEM

RANGE

DEFAULT

REMARK

System Speed

Zone

01-10

Speed Bin Range

in Zone

2200 – 2499

The system speed zone can be grouped the

maximum 10 system speed zone.

About each system speed zone, the

accessibility can be set at ADMIN program 232

– FLEX 2.

The toll check of each system speed zone can

be set at ADMIN program 232 – FLEX 4.

And the account code to access each system

speed zone can be set at ADMIN program 232

– FLEX 5.

But, the system speed bin section between

2000 and 2199 is defined the toll free zone.

The system speed dial within this zone isn’t

checked by the toll table.

Station Range

STA No.

10-35

The accessibility of the system speed zones

can be assigned to each station.

Toll Checking

ON/OFF

If this value is set to ON, the speed dial of this

zone is checked by the toll table.

232

Authorization

check

If this value is set, the station user must enter

this value to use the speed dial of each system

speed zone.

Weekly Time

Table

1 – 7

Day Start Time

0000 – 2359

0900

Night Start Time

0000 – 2359

1800

233

Weekend Start

Time

0000 – 2359

This ADMIN program is used at the ring

assignment feature(Ref Section 2.1.1).

The WEEKLY TIME TABLE can manage the

ring mode changes automatically.

The use of WEEKLY TIME TABLE is executed

by the system attendant and each intercom

tenancy group attendant.

Maximum 16 WEEKLY TIME TABLE is exist.

The first table is for the system attendant, and

the others are for the intercom tenancy group

attendant.

The table is consist of 7 days,

Monday/Tuesday/Wednesday/Thursday/Friday/

Saturday/Sunday.

On each day, the time zone of

DAY/NIGHT/WEEKEND mode can be

programmed.
For example, the office work starts at 9:00(AM)

and finishes at 5:00(PM) during week day. And

the weekend starts at 5:00(PM) from Friday to

Sunday. In this case, the WEEKLY TIME TABLE

can be set as the following ADMIN program

value.

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands