LG-Nortel IP LDK-20 Programming Manual Download Page 98

Page: 98 / 581

IP LDK-20 Programming Manual System Feature

Condition

1. VMIB MOH message should be recorded before setting VMIB MOH as system MOH source.

2. While attendant operates system greetings and prompt including VMIB MOH, VMIB MOH is

stopped.

3. When VMIB MOH is used as system MOH, 1 port of VMIB should be always reserved for MOH

even though MOH is not used.

Admin Programming

MOH Type

4.4.12.2 (PGM 171 – FLEX 2)

2.4.18 Mute

Description

During a conversation, if pressing the

[MUTE]

button, a station user can disable the handset or the

speakerphone to consult privately with others while listening to the other party on the phone through
the handset or speaker. If pressing the

[MUTE]

button again, it reactivates the microphone.

Operation

To mute the transmitting audio,

Press the

[MUTE]

button, and LED of the

[MUTE]

button is illuminated. The connected party cannot

hear the voice of muted station.

To restore transmission,

Press the illuminated

[MUTE]

button. LED of

[MUTE]

button is extinguished and transmission is

restored.

Condition

1. Changing from the speakerphone to handset, the mute is released.
2. Selecting another DSS button, mute state will not be changed.

Summary of Contents for IP LDK-20






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands

LG-Nortel IP LDK-20, Programming Manual

Search results

Summary of Contents for IP LDK-20

Reviews:

Related manuals for IP LDK-20

Brands by name

Popular brands