LG-Nortel IP LDK-20, Programming Manual

Page: 136 / 581

IP LDK-20 Programming Manual System Feature
120
2.7.3 Conference Room
Description
This feature allows internal users or CO callers to join a conference without being invited by the
conference supervisor. This conference feature has the conference join codes, and each conference
room has an own join code (room number). A DID and transferred CO call can be a member of
conference. This feature terminates only when deactivation code is dialed.
Operation
To Activate a conference room
1. Press the [PGM] + 4 + 3 + Room Number (1~9)
2. Dial 5-digit password (It is optional)
3. Press the [HOLD] button.
To Deactivate a conference room
1. Press the [PGM] + 4 + 4 + Room Number (1~9)
2. Press the [HOLD] button.
To join a conference room in case of internal call
1. Dial the activated conference room number. (571 ~ 579)
2. Enter 5 digits password for entering conference room if password is enabled.
To join a conference room in case of DID call
(In using of DID type 2, DID destination is assigned conference room)
1. DID call is routed to conference room
To Transfer CO Call to conference room
1. Press the Trans/PGM button at attendant.
2. Dial the activated conference room number. (571 ~ 579)
3. Enter password for entering conference room by the transferring station.
To check room status by ATD
1. At ATD, dial a conference room status code [PGM] + 047.
2. ATD’s LCD is indicated room activating station, member and etc.
Condition
1. The Maximum number of conference room is 9.
2. Up to Maximum 3 members can enter each room. (Same present conference feature)
3. Assigning and entering PASSWORD is Optional.
4. CONF ROOM status can be checked by ATD.
(How many members are joining the conference room)
5. For CO party, only ISDN line can enter a conference room. LCO line cannot be a member of
conference room.
6. If system attendant has a conference room button, she can check the status of conference room
with LED;
ON – Conference room is activated, but there is no member.
OFF – The conference room is deactivated.
Flash 60 IPM – The number of members are 1 to 3.