IP LDK-20 Programming Manual System Feature
162
Operation
In IP LDK system, the various operations about the incoming CLI is provided according to the ADMIN
program setting.
1. If the CLIP DISPLAY(ADMIN program 114 – FLEX 1) is set to ON, the incoming CLI is
displayed on station LCD.
2. If the CLI NAME DISPLAY(ADMIN program 114 – FLEX 11) is set to ON, the incoming CLI digit
display can be replaced to the matched station speed dial data name.
3. If the CLI print(ADMIN program 200 – FLEX 6) is set to ON, the incoming CLI can be printed to
RS-232C port.
4. If the MY AREA CODE(ADMIN program 200 – FLEX 9) is set, and this value is matched with
the start digits of the incoming CLI, then the matched digits are removed automatically.
5. If the MY AREA PREFIX CODE(ADMIN program 200 – FLEX 10) is set, it can be used at the
operation 4 with combination of MY AREA CODE.
6. If the CLI MESSAGE WAIT(ADMIN program 114 – FLEX 4) is set to ON, the unanswered CLI
data will be save at the station memory. (see Ref.1)
Condition
1.
Max. 12 digits will be displayed on DKTU as a CLI number.
2.
Though the power of system is off, the stored CLI messages is not erased.
3.
The CLI can be shown at SLT which has a CLI display LCD in IP LDK-20. But secondary SLT of
2B DKTU can’t display CLI information.
Reference
1. CLI Message Wait : 2.14.2.3
Admin Programming
n
CLIP LCD Display
4.1.5.1 (PGM 114 – FLEX 1)
n
CLI Name Display
4.1.5.10 (PGM 114 – FLEX 11)
n
CLI Message Wait
4.1.5.4 (PGM 114 – FLEX 4)
n
CLI Print
4.7.1.3 (PGM 200 – FLEX 3)
n
My Area Code
4.7.1.5 (PGM 200 – FLEX 9)
n
My Area Prefix Code
4.7.1.6 (PGM 200 – FLEX 10)
2.14.2.2 Outgoing CLI Service
Description
When a station of IP LDK system makes an outgoing CO call, it can send the telephone number.
The figure 2.14.2.2 describes an example of outgoing CLI process in IP LDK system. In the figure, the
outside CO caller is defined the called party, and the station 100 of IP LDK system is defined the
calling party. The calling party, station 100, makes an outgoing CO call to the called party, and IP LDK
generates the CLI of station 100 and transmit it to the called party.
At this example, the CLI of station 100 is ‘04313283100’. This CLI data is combined with three parts.
The start digits of CLI is ‘0431’. It is generated from the MY AREA CODE(ADMIN program 200 –
FLEX 9). The insertion/omission of this value is managed by the CALL TYPE(ADMIN program 143 –
Summary of Contents for IP LDK-20
